Devices online
0 / 0
Not monitoring
Active alarms
0
No limits exceeded
Records logged (session)
0
Every 10 s
Log folder
Not selected
Choose in Data Logging
Differential pressure
Relative humidity
Temperature
Dew point
Active alarms
| Time | Device | Type | Message |
|---|
Report settings
Devices & data points
Preview
Choose the time range and data points, then click Generate report.
Log folder
Not selectedReadings are saved continuously as CSV files in the folder you choose – e.g. the software folder. Structure: Data / YYYY-MM / YYYY-MM-DD_<Device>.csv (one file per device per day; opens directly in Excel).
Logging settings
Log files
| File | Size | Last modified | |
|---|---|---|---|
| No folder selected. | |||
Devices on the RS485 bus
| Tag / name | Location | Type | Address | Serial no. | Model | Pressure unit | Status | Poll |
|---|
Scan bus for Polwax transmitters
| Address | Detected | Serial no. | Model code | |
|---|---|---|---|---|
| Connect, then start a scan. Polwax transmitters ship with address 64. | ||||
Values are shown and written in the device's own unit. Only parameters marked R/W in the Polwax register map can be changed. Monitoring pauses while you read or write.
Select a device and click Read all parameters.
Communication
Polwax factory default: 19200 baud, 8 data bits, no parity, 1 stop bit, address 64.
Transmitters stay on RS485. Connect them to an RS485-to-Ethernet converter (e.g. USR-TCP232, Moxa NPort, ZLAN). Set the converter's serial side to 19200 8N1 and its work mode to TCP Server. RTU over TCP: transparent mode, port usually 4196 (USR) / 4001 (Moxa). Modbus TCP: converter in Modbus gateway mode, port 502.
Display & report
Alarm limits
Limits use the display units above| Device | Parameter | Source | Low limit | High limit | Unit |
|---|
Backup
Atmos Help Assistant
Instant answers about the software – works offline
User Manual
PDF · 21 pagesPolwax Atmos Monitor
Software User Manual · Version 1.2
Software User Manual · Version 1.2